These power stations and stockpiles are vulnerable to wind
Despite the transition to fully green energy, power stations fuelled by (hard) coal still supply a large percentage of the world’s electricity. In most cases, coal is mined a very long way from the power station and transported to consumers by ship or train. Under normal weather conditions, material loss during transport amounts to approximately 5 per cent. Unloading and further handling at the destination result in even greater losses.
Many power stations maintain a strategic buffer to ensure the continuity of energy production. However, these stocks are susceptible to wind, and without further treatment, (coal) dust is carried many kilometres by the wind.
Wuvio offers solutions that help you significantly reduce material wastage.
Traditionally, water is the most commonly used means of combating dust. However, for two reasons, water and coal are not a good combination. Firstly – depending on the type of coal – a relatively large amount of water is required to prevent dust formation. The second reason is economic: the drier the coal, the higher its calorific value; in other words, the more energy the coal can supply to the power station’s furnace.
The use of Wuvio crust formers prevents dust formation and also protects the coal stockpiles from moisture and rain. The crust former is sprayed over the stockpiles like a blanket, forming a thin, durable crust layer, coloured white, green or transparent as required.
Experience shows that dust challenges also occur at drop points on the belts or when handling the bulk material in the hopper. Here, solutions based on atomization can be employed. Moreover, by adding an additive to the mist, the action of water is much more effective. This is because the additive ensures that the water opens up, as it were, and can therefore hit/bind dust particles.
The use of our dust control solutions initially achieves savings in water consumption of up to 70–80 per cent.
Wuvio offers companies in the energy sector the following solutions for reducing dust nuisance:
Freko-Crust or Eco-Crust S (transparent or coloured) create a protective top layer on the stockpiles, ensuring that the stored material is exposed to the wind as little as possible.
Water atomisation and the addition of Freko-Humidifier – an additive that reduces the surface tension of water – prevents dust formation during the handling and transport of bulk materials.
Dry foam, Freko-Foam, is primarily used at drop points or transfer points on conveyor belts or in crushing plants. The foam has a binding effect and thus prevents dust formation.
RDS (Road Dust Solution) is an additive that is mixed with water and is easy to apply using a spray boom and a water tanker.